Tires and wheels for Kia Rio, wheel size for Kia Rio. Wheel size on Kia Small wheels on Kia Rio 3

Interesting! Since the very first model, Kia cars have used rubber various sizes. Practicality has always been the main criterion.

So, for small city models Kia Rio discs with a diameter of only 13 inches were used. This made it possible to reduce fuel consumption and also reduce the load on small engine. This lasted until 2005, when Kia model Rio with 1.4 liter engine.

Since 2005 on automotive market The second generation of Kia Rio cars has appeared. New cars were equipped with more powerful engines, which means the wheel diameter could be used larger.

Tires with a radius of even 15 inches began to be used. Some 2013 car models are equipped with a 1.6-liter engine and allow tire sizes with a radius of 16 inches.

True, in this case, low-profile tires are used, which makes such a car exclusively for city dwellers.

In 2015, new Kia Rio cars stopped using wheels with a diameter of less than 14 inches.

On the Rio model they began to install wheels on disks with a large offset. Size rims the width of cars has increased by half an inch.

Does tire width matter?

The short answer is yes. The width of the wheels used for Kia Rio cars can vary from 175 to 195 mm. These parameters may not seem so significant, however, changing them always affects the dynamics and fuel consumption.

Important! The smaller the tire width, the lower the consumption. However, this should not be abused, as the car’s stability on the highway will suffer and dynamics will be lost. When choosing these parameters, you need to find a balance.

Tire width affects the size of the wheel's contact patch with the road. An increased contact patch makes the car more stable and controllable at high speeds.

In winter, the contact patch also significantly affects the braking distance.

Although the manufacturer allows some variety in the choice of wheels for installation on the Rio model, it is important to understand what effect you want to achieve. It's about how the car will be used.

Let's say the car is used in rural areas, where the expensive ones are, to put it mildly, not very good. In this case, you should use high profile tires. Another solution is to use rims that are a size smaller and wheels with a high profile.

Interesting! To correctly calculate the required tire size, use tire calculator, which is available on most sites that sell rubber.

A similar technique is applicable in reverse side. If your car drives exclusively on the smooth streets of the capital, you can install large wheels with a low profile.

This will give your car a certain chic and attractiveness. You can easily calculate the required tire size using a tire calculator.

Two wheels may differ in load index, although they are the same size and have the same diameter.

The load index is measured in kilograms and represents the maximum load that a wheel can withstand.

Exceeding this indicator for a short time is acceptable, but it should not exceed 20%.

Kia Pio cars use tires with a load index of at least 88Q, which means that the tire can withstand a load of up to 545 - 560 kg. Letter designation Q indicates the speed index.

The speed index indicates the maximum permissible speed, at which the tire will fully perform its functions and be able to carry the specified load.

For example, the speed index Q indicates that the tire is designed to travel at a speed of no more than 160 μ/h.

Important! It is permissible to install tires with the speed index Q, R, S and T on Kia cars. This corresponds to a speed range from 160 to 190 km/h.

Kia Rio cars can be equipped with both directional and symmetrical tires. What's the difference? They do not differ in size or weight, and the diameter does not matter either.

Tires with a directional tread have improved performance compared to a symmetrical tread pattern. They better remove water and snow from the contact patch and retain other positive characteristics.

The only drawback of directional wheels is that the direction of rotation must be strictly observed, which means you cannot simply move the wheel from the left to the right.

On the other hand, tires with a symmetrical pattern are a classic option for new Kia Rio cars, and this applies even to some expensive models.

These tires do their job well and are easy to replace or move to the other side without re-flipping the tires.

Choosing tires for Kia car Rio must first follow the manufacturer's instructions.

You should ask yourself these questions:

• On what roads will the car be primarily used?
• Do you need increased cross-country ability?
• How much of the route will be city roads and how much will be highways?
• Will the vehicle carry heavy loads?

The answers to these and similar questions will help determine what tire parameters you need to pay attention to. special attention.

2.09.2017

Kia car Rio has been one of the best-selling cars in its class in Russia for several years. It has gained considerable popularity among car enthusiasts due to its modern technical characteristics, level of equipment and comfort, reliability and unpretentiousness, as well as, of course, appearance and price. I must say the popularity of the car is not limited to Russia and the CIS countries; it is successfully sold in South Korea, European countries, USA and others. Indeed, Rio of the second and, especially, third generations have become one of the most commercially successful cars of the brand. One of the important characteristics of a car today can be considered controllability, appearance and fuel consumption. They are largely influenced by which wheels are installed on the car. By choosing the right wheels for Kia Rio 2 and 3, you can significantly improve these and some other characteristics.

Kia Rio with stamped wheels and plastic caps

In addition, the choice of wheels will one way or another affect the following qualities auto:

• Controllability
• Braking distance
• Comfort level in motion
• Service life of suspension parts and tires
• Acceleration dynamics
• Fuel consumption

Wrong choice Kia wheels Rio can negatively affect any of these characteristics, as well as lead to a significant increase in financial investments in the car

Wheel sizes of Kia Rio second and third generation

Rio wheel size consists of two components - wheel size and tire size. When choosing both separately, you should keep this in mind. Also, if deep tuning is not planned, you need to use what the manufacturer recommends. When using wheels and tires recommended by the manufacturer, full implementation of the vehicle's capabilities is guaranteed, as well as maximum compliance with the declared characteristics in any driving situation. On the other hand, using wheels of other sizes can lead to poor handling, reduced suspension life, incorrect speedometer readings and other problems.

The main parameters indicated by the marking of rims are the width of the rim, its diameter, as well as the bolt pattern. To choose the right disc for Rio, you need to know how to decipher its size designations. Let's give an example:

The standard wheel rim size for Kia Rio 2 (2005-2011) is 5.5Jx15, where the first number indicates the width of the rim of the disk (the place with which the tire will come into contact) in inches, and the second number indicates the diameter of the disk, also in inches.

Tires are usually marked as follows: 195/55R15. It is this type of marking that is usually placed on the outside of the tire. The first number in it indicates the width of the tire in centimeters, the second is the percentage ratio of the profile height to the width, the third is the diameter of the rim for which it is intended.

The wheels of the Kia Rio 3 have similar characteristics to the wheels of the second generation car, however, their exact dimensions depend on the modification and configuration. This refers to the wheels and tires installed on new cars when they are sold. Subsequently, they can be changed to those that have the desired characteristics or appearance.

You can also install larger wheels on the Kia Rio, for example 205/55 R16. But this is most likely impossible without making changes to the design of the arches. Although you don’t always have to delve so deeply into the design of a car. Sometimes it is enough to install wheel arch liners so that the tires will not catch when the steering wheel is turned completely to the side and on uneven roads. The Kia Rio wheel size is determined based on the seating capacity in the arches.

We must remember that for a Kia Rio, a wheel size larger than that recommended by the manufacturer may cause deterioration in dynamics, reduced suspension life and incorrect speedometer readings.

Kia Rio wheel pattern

The bolt pattern of Kia Rio wheels is an important parameter that allows you to choose wheels for a car. It shows how many studs the wheel is attached to, the diameter of the holes for them and how they are located. The studs to which the wheel rim is attached with nuts are usually located on the hub and their number varies passenger cars from 4 to 6. It is important that the holes in the disk are the same diameter as the diameter of the studs and their number is the same. In addition, you need to take into account other parameters related to the bolt pattern, such as the offset and thread of the fastener. The offset of the disc directly affects its choice for a particular car model, and the fastener thread is needed for correct selection cone centering nuts that secure the wheels on the Rio. The wheel bolt pattern must correspond to that declared by the manufacturer, for Rio it is 4×100 with hub hole 54.1 with ET 46 offset and M12x1.5 fastener thread. This means that the wheels are mounted on 4 bolts located on a circle with a diameter of 100 mm. The use of another bolt pattern on the Kia Rio is not permitted for safety reasons. Here it must be said that the wheels on third-generation cars (2011, 2012, 2013, 2014, 2015, 2016) in terms of fastening do not differ from the second generation (2005-2010), therefore the bolt pattern is the same.

If there is a need to install wheels that do not fit standard hubs, you can use wheel spacers:

The exterior style depends not only on the type of body color, some tuning elements, but also appearance wheels, and in particular disks. However, the selection of these components should be approached not only from the point of view of aesthetic values, but also from the point of view of compliance of the size with the Kia factory requirements Rio Sedan 1.6i 2011-2017, as well as performance indicators. In the latter case, products made of light alloy metals largely benefit from stamping. However, in financially not every motorist can afford them.

More information about the presented assortment

Regarding forged products alloy wheels in Moscow are inexpensive structures, but they cost more expensive for motorists compared to steel rims. However, they are in great demand due to the ability of casting technology to produce real masterpieces in the style of light alloy products. Lightweight structures can become the main highlight of the exterior of the Kia Rio Sedan 1.6i 2011-2017. They offer decent corrosion resistance, which cannot be said about steel wheels, and demonstrate excellent driving performance.

Light alloy rims are made from aluminum or titanium alloy, which are valued due to their excellent physical and chemical properties. Moreover, in terms of strength, these alloyed metals are not particularly inferior to steel. With alloy wheels Kia owners Rio Sedan 1.6i 2011-2017 does not have to worry about maintaining its speed performance.

In addition, alloy wheels are valued due to their fuel efficiency, which is ensured by their lightweight design and low rolling resistance coefficient. In addition, they have excellent thermal conductivity, which helps prevent the possibility of overheating of the brake and chassis systems. This property allows drivers to feel somewhat more confident in the safety of movement. Light alloy products are balanced and have high accuracy of geometric parameters.

Difficulty of choice

Such a wide range of disc offers, which are offered today by domestic and foreign manufacturers, creates certain difficulties when purchasing components in Moscow. After all, sometimes brands charge absolutely nothing for the same technical characteristics of products. different prices. However, does the quality really live up to its claims?

On the website of the online store “Wheels for Free” you can read various reviews from motorists who have already managed to evaluate in practice all the advantages and disadvantages of various wheels on the Kia Rio Sedan 1.6i 2011-2017 and make your choice. You can also consult with the competent managers of our store, who will not only be able to choose the best wheel option for you in terms of quality and cost, but will also answer all your questions.

When choosing wheels, it is worth noting the importance of the quality of the roads you drive on. If you have to overcome extreme terrain difficulties every day, then it makes sense to give preference only to budget stamped components.

If you have a limited budget, you can always purchase a more affordable, but no less high-quality replica. Moreover, today many brands create copies of original wheels, which are in no way inferior in terms of performance characteristics to “original” parts.

Why is it worth buying discs from us in Moscow?

We suggest not wasting time on a long search for reliable distributors of automotive components and order wheel parts in the online store “Wheels for Free”. We have a wide range of disc models various types from time-tested manufacturers. We are confident that you will be satisfied with the quality of our service and the purchased product itself.

Using automatic selection of tires and wheels for the car Kia Rio, you can avoid many problems associated with their compatibility and compliance with automaker recommendations. After all, these components have a huge impact on a number of performance characteristics. vehicle, starting from handling and ending with dynamic qualities. In addition, tires and rims V modern car are one of the elements of active safety. That is why it is extremely important to approach their choice very responsibly, using quite specific knowledge about these products.

Unfortunately, most car owners prefer not to go into such technical nuances. Nevertheless, automatic system selection will be extremely useful, regardless of this, since it will minimize the likelihood of choosing the wrong rims or tires. And thanks to the widest range presented in the Mosavtoshina online store, it is very diverse.

Kia cars, Rio and Spectra models are very popular in the Russian Federation. These passenger cars earned respect thanks to their high technical specifications, comfort, internal equipment, ease of use, safety and reliability. Naturally, appearance and price factors also played an important role in this matter.

One of the most important characteristics is the vehicle's handling. This indicator is influenced by the wheels installed on the car. The controllability, reliability and safety of driving the Kia Rio and Spectra depend on their wise choice.

Kia Rio on factory wheels

According to the manufacturer, effective handling and aesthetic appearance depend on the size of the wheel used. In addition, high-quality models affect the degree to which:

• controllability;
• braking characteristics;
• driving comfort;
• operation of the main suspension components and tires;
• aerodynamic indicators;
• fuel consumption.

An illiterate choice will most likely lead to negative consequences. For example, handling or aerodynamic performance may deteriorate. As a result, the owner of the Kia Rio will have to pay additional funds to change wheels and tires.

Optimal wheel size for Kia Rio

The choice of optimal indicators for a wheel directly depends on the sizes of tires and wheels. Accordingly, when choosing, special attention should be paid to this factor.

For those planning to do tuning, you should take advantage of the competent advice of experienced craftsmen. They will advise you on the most suitable wheel size and diameter.

Vehicle owners who prefer to use “powerful horses” for their intended purpose can take advantage of advice from Kia Rio manufacturers on choosing standard sizes. At the same time, manufacturers guarantee high vehicle controllability, according to maximum characteristics for any road conditions when using factory wheels.

Installing wheels with non-standard parameters can cause poor handling and poor comfort. Speaking about the characteristics indicating the designation of wheel rims, it is worth highlighting three important indicators:

1. diameter;
2. width;
3. loose bolt

Therefore, the correct choice of disk size directly depends on the wheel used. First of all, you should analyze and decipher the disk designation. For example, the 2011 Rio has a factory wheel size of 5.5J/15. The first indicator is the width of the rim, and the second number shows the exact diameter of the wheel being used. This indicator is measured in inches.

As for tires, they are usually designated using the following method: 185/65/R15. This or an identical type of marking is indicated on the surface of the tire. The first number determines the width in centimeters, the next shows the ratio of the height of the material to the size of the tire, and the third indicates the diameter of the disc used.

Wheels for Rio 3 have identical performance to their second generation counterparts. However, their exact parameters are affected by basic equipment and vehicle updates. This refers to the wheels and tires used on newer vehicle modifications when sold. Even though the factory parameters of the wheels are set, in the end they can be replaced with more comfortable and presentable analogues.

You can also install larger wheels on the Kia Rio. As an example, let's take a size like 205/55/R16. However, without additional changes and modifications in terms of the arched structure, such wheels cannot be installed. However, it is not always necessary to apply drastic decisions. Usually, to install large models, you can mount volumetric fender liners. Thus, when driving and sharply turning the steering wheel, the wheels will not catch them. In this situation, the wheelbase dimensions are determined according to the characteristics and capabilities of the arches.

Changing wheel sizes on Rio

Do not forget that for the Rio model, it is best to use the wheel sizes 175/70/R14, 185/65/R14, 195/55R15 recommended by the manufacturer. Otherwise, this may lead to a decrease in the performance of the suspension, a decrease in dynamic acceleration indicators and violations of the digital settings on the speedometer. An exception to the rule may be larger wheels if certain design changes are made.

Wheel bolt pattern

This process plays an important role in determining the correct wheel sizes for any type of machine. The bolt pattern shows the number of studs for fastening the wheel, the diametrical size of the holes and the main location. Basically, the studs for attaching the nuts are located on the hub. Passenger cars have from 4 to 6 studs, depending on the model. It is extremely important that the disc holes match the diameter of the studs as well as the number of studs.

It is worth taking into account such important parameters, such as fastener threads and offset. Disc offset has a direct impact on the wheel parameters for a particular vehicle model. When it comes to mounting threads, it is worth choosing the correct cone-shaped centering nuts for the main installation of wheels on the Kia Rio.

When loosening wheels, it is necessary to take into account the basic parameters declared by the manufacturer. For the Rio 54 by 100 model:

• hole – 54.1;
• departure – ET46;
• mounting thread – M12 by 1.5.

Based on the given characteristics, the wheels are secured with 4 bolts with dimensions disk circles 100 mm. Other bolt pattern parameters are not recommended for safe and reliable operation of the vehicle. It is worth highlighting the fact that in terms of fastening, the wheels on Rio 2011-2016 are in no way different from the second edition of the car from 2005-2010. Accordingly, the bolt pattern will be the same.

Competent choice of wheels on the Spectra

The choice of wheel sizes on the Spectra directly depends on the use of steel or titanium wheels with the following standard sizes:

• hub diameter DIA;
• rim width J;
• wheel diameter R;
• bolting and drilling DCO and PCD.

1. Spectra 1.8 – 185/65R15;
2. Spectra 1.6 – 185/65/R14, 196/65/R14;
3. Spectra 2.0 – 195/65/R15.

If the assigned parameters are not followed, this factor can seriously affect the controllability performance, braking distance and vehicle aerodynamics. In addition, the manufacturer cancels the warranty on the vehicle if the factory specifications are not followed.

The wide range of wheels on the domestic market offers various variations on Kia Spectra. Popular manufacturers include:

• Continental;
• Nokian.

For Spectra this is the most optimal options tires In addition, their dimensions make it easy to control and maneuver the machine. If a car enthusiast finds it difficult to choose wheels, then you can turn to experienced tire specialists for help.

Wheel brands

For such popular models as Rio and Spectra, the domestic market offers a large assortment of high-quality wheels. Prices for new tires and wheels vary widely. Based on the cost, you can determine a fake or an original product with specified characteristics.

When giving preference to one wheel or another, special attention should be paid to their purpose and the quality of the products sold in auto stores and markets. Such famous brands, like Bridgestone and Pirelli, use unique nanotechnology to create original tires, allowing them to achieve excellent results in terms of vehicle handling and speed performance.

Basically, the cost of wheels from these manufacturers is significantly higher than similar models. However, budget-priced options do not have the same level of relationship between quality and cost.

Now domestic brands have begun to actively compete with foreign manufacturers quality rubber for the wheelbase. Such companies have managed to gain great popularity among many Kia owners. There are also other manufacturers on the car market offering good quality tires from China. Moreover, many of them have been trying to compete with more expensive analogues for several years.

Among the wheel manufacturers with worldwide recognition and high popularity, it is worth listing the following brands:

• Bridgestone;
• Pirelli
• Hankook;
• Dunlop;
• Michelin.

Domestic and Chinese manufacturers of high-quality wheels:

• Codriant;
• Viatti;
• Goodride.

For modified Kia Rio and Spectra, Hankook tires are usually used and Kumho Solus. Both manufacturers produce tires high quality, complying with safety standards.

Crash tests have shown that such tires can outperform even famous competitors in terms of speed. As an optimal replacement, you can use Nokian 5 tires, which demonstrate unsurpassed handling and braking results in all conditions.

As an optimal winter tires will fit Russian tires Cordiant Polar 2. They show excellent results in terms of high control, braking on steep descents and straight roads, and long-term operation.