The Taiwanese company Maxxis is one of the relatively young tire manufacturers - it was founded in 1967. At first, the company specialized in the production of tires for bicycles and motorcycles, and the production of technical pipes was a separate area.

Two years after the opening, Maxxis entered into a partnership agreement with the Japanese concern Kyowa, which made it possible to increase start-up capital, as well as significantly increase production volumes.

In 1974, the company became Taiwan's largest exporter of rubber products and began manufacturing truck and bus tires. A year later, Maxxis upgraded and acquired the most technologically advanced and efficient equipment at that time, and also opened its own research laboratory in Los Angeles.

Maxxis strengthens its position in Europe

In the early 1980s, two new tire factories were built and one more for rubber production. This made it possible to increase the volume of sales of products to 2.7 billion US dollars, and by 1986 - to 3.7 billion dollars.

In 1987, Maxxis issues securities and enters the Taiwan stock market, and establishes a joint venture with Japanese partners to produce rubber products for the automotive industry.

By 1990, Maxxis' tire sales had reached $5 billion. A few years later, the company began to master Russian market: At first, bicycle tires became very popular, after which sales of motorcycle and automobile tires, as well as other rubber products, increased.

The impeccable quality of Maxxis products is confirmed by the fact that they are supplied to the factory equipment of bicycles, motorcycles and cars of many well-known manufacturers. Among them are Ford, Nissan, Yamaha and Honda (including all-terrain vehicles of these brands), Suzuki, Kawasaki, etc.

Maxxis tires offer excellent performance, low noise levels, structural strength and long service life.

Maxxis tires, reviews of which we will analyze below, should be bought already because the Taiwanese company Cheng Shin Group that produces them has been on the market for over 40 years. There is not a single type for which Cheng Shin Group would not invent and release tires. They "shoe" buses and ATVs, trucks and "ladies" cars, SUVs and agricultural vehicles, as well as bicycles, motorcycles, scooters ...

Maxxis - tires for every occasion. The product line also includes winter, off-road, tires for the most different types technology.

Maxxis factories are located in Asia (there are 10 of them), technology centers are scattered around the world, and the test site is located in China. The company supplies its products to half of the countries of the world, giving preference to the United States. I must say that car manufacturers highly value these products. Maxxis, reviews of which the manufacturing company collects around the world, are highly appreciated by the manufacturers of Volkswagen, Toyota, Chrysler, Peugeot, Ford and a dozen more famous brands. It is Maxxis that is included in their standard factory package.

Statistics report that every year the company sells a third of all tires that are produced and sold at Maxxis. This is the main guarantee of Maxxis quality.

Reviews of motorists largely coincide with the opinion of car manufacturers.

Some car owners appreciate winter tires because they (the tires) can provide the strongest possible grip on the road. Even if this road is a skating rink or a large snowdrift. Special compounds added to winter tires do not allow it to lose its properties even at -40 °. Exclusive tread patterns (there are several of them) reliably roll snow from the contact patch to the sides. The same protector perfectly "clings" to the road.

Not everyone is happy with Maxxis winter tires. The reviews of some motorists express their dissatisfaction with the slightly higher operation of such rubber and, in their opinion, wear too fast winter tread. However, such reviews are much less than those that express positive emotions.

Like warriors and high-speed tires Maxxis. Even professional racing drivers leave reviews about it. They (the tires, not the racers) are excellent at resisting temperature loads, and increase the car's handling. This is why many pros prefer the Maxxis high-speed tires, despite their fairly quick wear and slightly less comfort.

Perhaps, the only difference between motorists from different countries is all season tires Maxxis. Reviews of some, for example, Americans and Germans, mark her high quality, excellent adhesion to the road, sufficiently long-term operation. The reviews of others, for example, the Swedes and Norwegians, note the lack of these same qualities.

The thing is that all-season tires during production take into account the climate of the country where they are produced. Sometimes these characteristics are adjusted to “average climatic” parameters that do not take into account extreme temperatures, excessive humidity, or the like. Excellent traction will only coexist with perfect handling on excellent quality roads under average weather conditions. Unfortunately, neither one nor the other exists in Russia. Therefore, it is better not to save money, but to buy shoes for the car according to the season.

One more detail should be mentioned. It's no secret that in any, even the most high-quality production, marriage happens. In the 40 years of the company's existence, not a single defective product has been put on sale. It works great in all branches. Products are tested at different stages of production, packaging and shipment.

So if you are going to buy tires - buy Maxxis. You will not regret.

Tire manufacturer Maxxis. Maxxis tires manufacturer country

Tire manufacturer Maxxis - Information

Tire manufacturer Maxxis

The Maxxis company's triumph began in 1967, when its main activity was the production of tires for karts and ATVs. Currently, the manufacturer is positioning itself in the automotive products market as a powerful industrial giant that keeps pace with the times.

Today, this internationally recognized company has the opportunity to offer its customers a whole range of innovative technologies and interesting ideas, embodied in reality in the form of tires. Maxxis R&D Centers operate under special quality control programs that allow strict control not only of the main material raw materials, but also of the final product. This approach made it possible to carry out quality testing of manufactured tires and rims and at the same time minimize the occurrence of quality problems. In addition, the current level of development of Maxxis allows us to talk about the undisputed leadership among the world's largest manufacturers. automotive rubber. And a huge number of prizes and awards only proves the high level of quality service and satisfaction of the needs of all categories of car owners.

If we consider the main categories of rubber for cars that Maxxis can offer customers today, then we can distinguish the following types:

Small cargo real helpers in harsh winter conditions;

Trucks are used for driving on city and federal roads, they provide driving stability and excellent ability to restore the tread, and a reinforced carcass can significantly extend the useful life of tires;

Passenger cars show excellent results on any road surface and are distinguished by an increased coefficient of stability, the absence of noise and a smooth ride.

Maxxis tires are specialized in 5 directions: All-Terain, Highway, Mud Terrain. Performance, Winter SUV. They are characterized cross-country ability, long service life, unique protection of the side part of the autodisk, the ability to use during the off-season. In addition, the polyester carcasses of the tires perfectly absorb shocks from a variety of bumps, which significantly soften the ride. It is these properties that make Maxxis tires a no-compromise solution for all driving conditions.

A characteristic difference between Maxxis tires is the presence of a metal cord breaker with a minimum number of seams and a nylon coating without transverse joints. These revolutionary properties combine to give tire construction exceptional strength, wear resistance and uniformity. In addition, these technological features prevent a high concentration of pressure when inflating the tire itself.

Maxxis car tires are modern and reliable tools to increase practicality and stability on all types of road surfaces.

autoshini.com

Maxxis tires, reviews of which we will analyze below, should be bought already because the Taiwanese company Cheng Shin Group that produces them has been on the market for over 40 years. There is not a single type for which Cheng Shin Group would not invent and release tires. They "shoe" buses and ATVs, trucks and "ladies" cars, SUVs and agricultural vehicles, as well as bicycles, motorcycles, scooters ...

Maxxis - tires for every occasion. The product line includes summer and winter tires, mud tires high level of cross-country ability, tires for a variety of types of equipment.

Maxxis factories are located in Asia (there are 10 of them), technology centers are scattered around the world, and the test site is located in China. The company supplies its products to half of the countries of the world, giving preference to the United States. I must say that car manufacturers highly value these products. Maxxis, reviews of which the manufacturing company collects around the world, are highly appreciated by the manufacturers of Volkswagen, Toyota, Chrysler, Peugeot, Ford and a dozen other well-known brands. It is Maxxis that is included in their standard factory package.

Statistics report that annually the company sells a third of all tires that are produced and sold on the globe. This is the main guarantee of Maxxis quality.

Reviews of motorists largely coincide with the opinion of car manufacturers.

Some car owners appreciate winter tires because they (the tires) can provide the strongest possible grip on the road. Even if this road is a skating rink or a large snowdrift. Special compounds added to winter tires do not allow it to lose its properties even at -40 °. Exclusive tread patterns (there are several of them) reliably roll snow from the contact patch to the sides. The same protector perfectly "clings" to the road.

Not everyone is happy with Maxxis winter tires. Reviews of some motorists express their dissatisfaction with a slightly higher noise level during the operation of such rubber and, in their opinion, too fast wear of the winter tread. However, such reviews are much less than those that express positive emotions.

Like warriors and high-speed tires Maxxis. Even professional racing drivers leave reviews about it. They (the tires, not the racers) are excellent at resisting temperature loads, and increase the car's handling. This is why many pros prefer the Maxxis high-speed tires, despite their fairly quick wear and slightly less comfort.

Perhaps, only the Maxxis all-season tires cause disagreement among motorists from different countries. Reviews of some, for example, Americans and Germans, note its high quality, excellent adhesion to the road, and a fairly long operation. The reviews of others, for example, the Swedes and Norwegians, note the lack of these same qualities.

The thing is that all-season tires during production take into account the climate of the country where they are produced. Sometimes these characteristics are adjusted to “average climatic” parameters that do not take into account extreme temperatures, excessive humidity, or the like. Excellent traction will only coexist with perfect handling on excellent quality roads under average weather conditions. Unfortunately, neither one nor the other exists in Russia. Therefore, it is better not to save money, but to buy shoes for the car according to the season.

One more detail should be mentioned. It's no secret that in any, even the most high-quality production, marriage happens. In the 40 years of the company's existence, not a single defective product has been put on sale. This is how the quality control service in all branches works wonderfully. Products are tested at different stages of production, packaging and shipment.

So if you are going to buy tires - buy Maxxis. You will not regret.

Source: fb.ru Cars "Velcro" (tires) - what is it? Velcro winter tires: reviews

As a rule, drivers use two types to travel by car in winter. winter tires. These are studded or Velcro tires (friction type). The first tires are equipped with metal...

Bridgestone cars (summer tires): reviews. "Bridgestone" ( summer tires): tests, tips for choosing

There are brands that are well known to many. For example, Bridgestone. Tires summer reviews received good ones, and this is no coincidence: the manufacturer of the brand is the world leader in their release. The history of the plant began e...

Cars Winter tires "Continental": reviews. Tires "Continental" winter studded

IN winter time the characteristics of the rubber in which your car is “shod” are extremely important: if something is wrong with it, you have every chance of getting into a fairly serious accident. It is not surprising that when choosing such a...

Cars Tires "Matador": reviews of motorists about summer and winter tires

To date, the global tire market is simply overflowing with various brands and models of tires. In stores you can find products from both the most famous manufacturers involved in this business for decades, such as...

Cars Chinese Triangle tires: reviews of car owners

Very often, many people are skeptical about the products of Chinese manufacturers, considering them to be of insufficient quality and reliability. So and Chinese tires Triangle reviews are very different - from sharply ...

Cars Hankook tires: testimonials from grateful customers

Hankook Tire is considered one of the fastest growing manufacturers car tires. First Hankook brand was registered in Korea in 1941. Today the company is one...

Cars Kumho tires– reviews of motorists

With the advent of winter, all motorists face the choice of a suitable tire for their cars, meticulously studying what the market offers. Important to consider when choosing winter tires its quality, grip and others are essential...

A general practitioner is another name for the specialization of a family doctor. Feedback on the activities of such doctors, as a rule, is positive. After all, if a doctor is a bad specialist, it will become clear very soon, but ...

Not far from the village of Tenginka in the Tuapse district is the village of Lermontovo. It is interesting that the poet has never been to these places, although his regiment was fortified here. The village of Lermontovo (colloquially - Lermontovo ...

Cars Winter tires Toyo: reviews. Tires Toyo Proxes: description, features

Driving safety directly depends on the quality of car tires. Special attention given to the choice of winter tires. After all, not everyone can withstand the sudden changes in temperature that are typical for some regions. Tires...

monateka.com

Maxxis

TM Maxxis is owned by the Taiwanese company Cheng Shin Group, one of the largest organizations in the world, which has been specializing in the production of various categories of tires for more than 40 years. cars, trucks, buses, agricultural vehicles, ATVs, bicycles. In 2008, MAXXIS ranked 12th in the global tire industry with a turnover of $2.1 billion.

In 2009, MAXXIS ranked 10th in the global tire manufacturers ranking with a turnover of 1.887 billion euros.

At the end of 2010, MAXXIS ranked 9th in the ranking of global tire manufacturers with a turnover of 3.36 billion dollars.

Ten factories of the company are located in Thailand, China, Vietnam, Taiwan. Subdivisions and technological centers - in the USA, Canada, Great Britain, Holland, Germany. China has its own proving ground with many tracks designed to test tires in various weather and road conditions.

MAXXIS tires are shipped to various countries around the world, including Japan, Germany, Australia, the UK, France and the Netherlands. But the American market is one of the priorities. MAXXIS tires are supplied as factory equipment for Toyota, Ford, Peugeot, Volkswagen, Nissan, Chrysler, GM, Hyundai cars in various countries around the world.

Maxxis tires are:

• High quality and suitability for use in almost any weather conditions;
• Providing excellent handling even during extreme driving;

• Good grip on any road surface;
• Ensuring a confident smooth ride on turns, sharp descents and ascents.

Maxxis winter tires

The tread pattern of Maxxis winter tires allows for a comfortable safe management by car in any weather and almost completely eliminates aquaplaning.

Their distinctive features:

• Reliable control and stability in icy conditions;
• Stable driving on snowy surface, good grip;
• Ensuring the safety of movement on wet surfaces;
• Extended service life.

Maxxis summer tires

They provide comfortable driving in the summer, both in contact with a dry road surface and with a wet one. They have good wear and puncture resistance.

MAXXIS tires will ensure the reliability and comfort of movement wherever you go - whether it be desert or mountains, in any weather conditions - asphalt hot by the sun or snow-covered track.. Different kinds tires and MAXXIS tread patterns, as well as impeccable quality will help you be confident on the road in any weather.

Maxis is located in Taiwan and is one of the largest manufacturers car tires. In 2008, it appeared in the ranking of all tire manufacturers, taking 12th place in it. Now under this brand many models of tires are produced, which are popular all over the world, and recently in Russia. Some Maxis models are installed on vehicles when descending from the assembly line by manufacturers, which indicates impeccable quality. Consider the Maxxis tire rating and review.

Maxis tire rating

Maxxis Bravo HP-M3

The reviews note that for their price category models are great. They create a minimum amount of noise, so a comfortable driving is achieved. However, they are not suitable for fast driving, as handling deteriorates.

Maxxis Arctictrekker NS3

The second position was taken by tires Maxis Arctic Tracker NS3. They are designed for use in extreme winter conditions. The tread pattern is directional with sharp edges. They are necessary for the effective removal of moisture from the surface. There are no spikes on the tread, but their role is played by lamellas on the blocks, which significantly improve grip.

The composition of the rubber has also been changed, due to which it retains its properties over a wide temperature range. The reviews say that the grip of the model is excellent. At the same time, the cost is more than acceptable.

Maxxis Victra M-36

On the third place summer tires Maxis Victra M-36. During their development, a modified rubber composition was used, which is necessary to improve grip on any surface. The longitudinal rib in the center, which has notches, is responsible for directional stability here. Also, in addition to providing high performance, the tread provides low noise when driving.

Of the advantages, the owners note the responsiveness of the wheels to steering turns, because of this, driving becomes more predictable. However, there are also disadvantages - poor braking efficiency.

Maxxis Arctic Trekker NP3

Fourth place went to winter tires Maxis Arctic Tracker NP3. They are designed for harsh conditions, as evidenced by the pronounced studded tread pattern. They are arranged in a certain order, so they are as efficient as possible and at the same time do not create additional noise.

Compound rubber compound provides improved wear resistance. Additionally, the frame is improved by a stiffening rib in the center. The reviews write that on wet pavement, grip remains excellent, and patency is maintained in all conditions.

Maxxis AT-980

In fifth place are all-season tires Maxis AT-980. In their development, innovative technologies were used, due to which it was possible to achieve high performance. They are designed for SUVs and crossovers.

Separately, it is worth noting the tread pattern. It has grooves in the form of a zigzag, which effectively remove moisture from the surface. The composition of the rubber is more compacted, so the working life increases.

Of the advantages, motorists note improved wear resistance, grip and effective braking, as well as good off-road patency. Additionally, tires are protected from external mechanical influences.

Maxxis MT-762 Bighorn

Sixth place belongs to all-season tires Maxis MT-762 Bighorn. They are designed for SUVs, have a pronounced tread pattern with larger blocks, due to which the cross-country ability is significantly improved.

On the side there are blocks of a special shape, they almost completely cover the profile of the tires, protecting them from cuts. The grooves on the tread are increased in width and depth, therefore providing excellent resistance to the hydroplaning effect. Also, for owners who do not have enough grip, there is the possibility of installing spikes, as there is room for this.

Maxxis offers quality tires at low prices, which explains their demand in the market. Its range currently consists of various models for any season, so every motorist will be able to choose the best option for themselves.

About company Maxxis (Maxis)

The history of the company dates back to 1967 in Taiwan. Maxxis offers various categories of tires for passenger cars and trucks, jeeps, including off-road tires, tires for ATVs, karts, as well as special equipment. The use of modern technologies developed by the Maxxis Scientific Institute guarantees high quality products.

History of Maxxis:

• Cheng Shin Rubber Ind. Co., Ltd., Maxxis Co. was founded in 1967 in Taiwan.
• 1967 The company opened with an initial capital of $6,000,000.00 and 178 employees. At this time, the company produced tires for motorcycles and bicycles, as well as pipes. The products have been approved by the Central Bureau of National Standards (CNS).
• 1969 Technical cooperation with Kyowa LTD. (Japan), for the production of bicycle tires and pipes. Capital increased to $24,000,000.00.
• 1971 Product quality was approved by the American Department of Transportation. A good reputation has been won in the export market. The number of employees increased to 600 people.
• 1974 The company became the largest exporter of rubber products in Taiwan and received an award from the Government. Capital increased to $120,000,000.00. Launched the production of tires for passenger buses and trucks.
• 1975 The company acquired latest equipment quality control and began to implement more stringent quality control. An office was established in Los Angeles, California USA. The number of employees increased to 1,200.
• 1976 All tires and vacuum tubes for trucks, buses, cars, motorcycles, and agricultural and industrial vehicles were manufactured to new standards issued by the Central Bureau of National Standards. The company was authorized to use the symbol of this bureau.
• 1977 Established an office in Taipei to handle exports. Capital increased to $220,000,000.00.
• 1980 Quality control was rated excellent by the Ministry of Economy. Capital increased to $420,000,000.00. the number of employees increased to 2,200 people.
• 1981 A new factory in Chung Chuang, Chang Hwa, was built to produce high quality bicycle tires. Capital increased to $583,800,000.00.
• 1982 Signed a cooperation contract with Toyo Rubber Ind.Co., Japan. (rubber factory). A modern tire manufacturing plant was built. Capital increased to $720,000,000.00.
• 1983 Total domestic and foreign sales reached $2,700,000,000.00. The company has taken a leading position in the production of tires in Taiwan. Capital increased to $828,000,000.00.
• 1984 The Japanese government granted JIS a certificate for the production of tires for bicycles and motorcycles. Began production and sale of steel belted radia tires.
• 1986 Sales reached $3,770,000,000.00. The total number of bicycle tires produced for export exceeded 20 million pieces. Bought new banbury mixers to increase productivity.
• 1987 Yang Shin Ind established. Co. Ltd., a joint venture between Toyo Rubber Ind. Co. (Japan) and Cheng Shin. Yang Shin, which manufactures rubber parts for the automotive industry. Obtained JIS certificate from Japan for the production of tires for buses, industrial and agricultural vehicles. Shares were issued and traded on the Taiwanese market.
• 1988 Equity increased to $1,625,094,900.00. A new factory was built in Hsi-chou, which started manufacturing tires for bicycles and production machines.
• 1989 Cheng Shin Rubber Co. was established. Obtained EEC certificate for radial tyres.
• 1990 Total domestic and foreign sales reached $510,000,000. Cheng Shin Rubber Co., USA was established. Capital increased to $2,437,640,000.00. Investments were made in San Yueh Textile Co., Ltd.
• 1991 On October 17, Taiwan's Ministry of Economy approved a proposal from Cheng Shin to invest US$20,000,000.00 for Cheng Shin Rubber (Xiamen) Ind. Ltd.
• 1992 Chen Yun-Hwa was appointed General Manager. Invested $250,000,000.00 in the construction of a new Automated Warehouse. Capital increased to $3,159,184,500.00. Management was built on the principle of honest management; the leading place was occupied by the quality of products and the people working in it. Sales exceeded NT$6 billion.
• 1993 Hsi Chou Factory was granted JIS certificate issued by the Japanese government. NT$250,000,000.00 invested to build a new rubber blending plant. Capital increased to NT$3,633,062,180.00. The automated warehouse was launched in July, and new equipment was purchased to increase the types of tires produced.
• 1994 The organization received ISO 9001 certification in February, making Cheng Shing Rubber the first Taiwanese manufacturer to receive such certification. In November, Ford Automobile Company awarded Cheng Shin Co with the first quality award.
• 1995 Capital increased to NT$5,015,079,030.00. In April, received approval from the Taiwan Investment Commission to transfer US$30,000,000.00 to Cheng Shin Rubber Co. (China) as initial capital.
• 1996 Cheng Shin Rubber capital rises to NT$5,515,079,000. In January, Toyo Tire of Japan joined forces with Cheng Shin Rubber (China), resulting in a total capital of US$72 Million, 30% of which was Toyo Tire's investment. In August, after approval by the Taiwan Investment Commission, US$2.5 Million capital was transferred and used to set up jointly with Toyo Tire, Cheng Tong Machinery Co. (Kunshan). The total funds of the new company amounted to US$5 Million, 50% of which was CST funds. The second stage of construction of the factory for Cheng Shin (Xiamen) has been completed and production has started. Cheng Shin Rubbin (Hong Kong) was closed.
• 1997 CST capital increased to NT$6,068,245,620. On May 29, CST's Quality Assurance program was certified to QS9000 standards. Cheng Shin Rubber Co. (China) started production in July after construction was completed. Also in July, Maxxis International Company, Ltd. was established in the Cayman Islands with the approval of the Investment Commission. In addition, Maxxis is investing in Cheng Shin (Xiamen).
• 1998 CST capital was NT$6,796,435,090. In October, the Investment Commission approved an indirect investment of US$12 million in the Da Feng (Tienjin) rubber industry enterprise, a subsidiary of Maxxis International Co., Ltd. On October 20th, His-Chou factory was awarded Japan's "Excellent Manufacturing Service" award.

Maxxis today:

Maxxis offers various categories of tires for passenger cars, trucks, jeeps, including off-road tires, tires for ATVs, go-karts, and special equipment. In addition, the use of modern technologies developed by the Maxxis Scientific Institute guarantees high quality products. All Maxxis factories have a quality control program in place, both for the raw materials used and for the final product. As for the latter, the company constantly tests tires, which actually reduces the occurrence of quality problems to zero.

Company Maxxis Thanks to the use of new technologies, the implementation of a quality control program and after-sales service, it has not only been ranked among the top ten largest tire manufacturers, but has also received numerous prizes and awards, and also has various world-class certificates.

Company Maxxis has several factories located around the world, as well as several large representative offices in the United States, Taiwan, China, Thailand, Japan, Germany and Canada, in total, the company has more than 100 representative offices worldwide. The Russian representative office of Maxxis International was opened in 2004 as the official representative of the manufacturer's plant in the Russian Federation.

Numerous awards and certificates can be considered the results of production based on new technologies and constant quality control: Quality Certificate A, National Certification Center, Taiwan. Certificate E, European Economic Union. Manufacturing Standards Certificate, Japan Department of Transportation Approval, USA ISO 9001 Certificate - Quality Assurance of the ISO Certification System. QS 9000 Certificate, USA Forbes Global recognized MAXXIS as one of 200 the best companies peace in 2001. Silver award from the Ford company, 2001. Russian certificates of conformity for all sizes of tires Maxxis. At MAXXIS, we care about the future of the company, about its people, production and quality. Through research and development in new technologies, winning by speed, MAXXIS has all the essentials for further development and growth.