The program consists
of 3 courses

Complete courses (3) in the order suggested.

Qualification work

Complete practical qualifying work.

Certificate of worker's profession

Receive a qualification document and start working.

MINISTRY
EDUCATION AND SCIENCE
RUSSIAN FEDERATION

Training for a driver of a self-propelled drilling and crane machine is regulated by Order of the Ministry of Labor of Russia No. 208n dated 03/01/2017 “On approval of the professional standard “Pile driving and driving operator”.

Self-propelled drilling and crane machines are widely used in urban construction for the construction of pile foundations of buildings and structures, bridge supports, pipelines, wells, power supply and communication lines, wells, fences, as well as for the construction of roads, planting trees and shrubs. They are joint drilling and special crane equipment mounted on the chassis of serial cars and tractors, driven by the engine of the base machine or an independent power plant.

Drilling and crane machines are classified according to the following main characteristics:

• by type of base vehicle: automobile and tractor;
• according to the operating principle of drilling equipment: cyclic and continuous action;
• by type of drive of drilling and crane equipment: with mechanical, hydraulic and mixed (hydromechanical) drive;
• by type of design of drilling and crane equipment: combined (drilling and crane equipment are mounted on one mast) and separate (drilling equipment is mounted on a mast, crane equipment is mounted on a boom);
• if it is possible to rotate the working equipment in plan: fixed and rotary;
• according to the location of the working equipment on the base chassis: with a rear, side arrangement for fixed machines, on a turntable for rotary machines.

The main parameter by which self-propelled drilling machines differ is the maximum depth of the well. It is also necessary to evaluate the recommended diameter of the resulting well, the possibility of changing the angle of the axis from the vertical, as well as the lifting capacity of the crane (if there is one).

The profession of a driver of a self-propelled drilling and crane machine requires the following skills: knowledge of the device, operating principle, and technical characteristics of the machine; rules for drilling holes for supports and pillars; rules for installing supports, pillars, etc. in them. using a crane or machine; knowledge of the rules and instructions for operation, maintenance and repair of the machine, performing lifting operations during the installation of supports, poles, etc.; causes of occurrence, methods of manifestation and troubleshooting; lubrication modes; fuel and lubricant consumption standards and ways to save them; as well as knowledge of plumbing for repairing construction or other machines of similar complexity, etc.

To perform work, the operator of a self-propelled drilling and crane machine must graduate from a vocational school, take short-term training courses of at least 72 hours no more than once a year and no less than once every 5 years in order to acquire new knowledge and skills and improve their rank , have a medical record with no contraindications to work and driver license category "C". It is important that persons under 18 years of age are not allowed to work as a drilling rig operator.

Cost of training and terms of study

ANO DPO "Comprehensive Training Center for Personnel Retraining" provides vocational training in the following programs:

Form of study: full-time, part-time, distance learning using Internet technologies.

What is included in the training program

In the process of mastering the training program, developed taking into account Order of the Ministry of Labor of Russia No. 208n dated 03/01/2017 “On approval of the professional standard “Pile driving and driving operator”” for mastering the working profession of self-propelled drilling and crane machine operator, the following questions are studied:

• Review of drilling and crane machines.
• Construction of drilling and crane machines.
• Maintenance and repair of drilling and crane machines.
• Removable lifting devices.
• Operation of drilling and crane machines.
• Industrial safety requirements
• Labor protection during drilling work
• Fire safety requirements
• Electrical safety requirements

Classes are held in the classroom of the ANO DPO “Comprehensive Training Center for Personnel Retraining,” as well as through the Internet portal of the Training Center website.

Upon completion of training, you will be issued

• Certificate for each employee who has passed the certification;
• Protocol of the certification commission with a list of employees who have passed the certification.

How to get trained as a drilling rig operator

After completing vocational training (or at a specialized school or training center), the driver of a self-propelled drilling and crane machine has the right to increase the assigned rank of his specialty by taking short-term advanced training courses of at least 72 hours, no more than once a year and no less than once once every 5 years, and there is a certain gradation for each of the categories, namely:

Advantages of working with ANO DPO “Comprehensive Training Center for Personnel Retraining”

• all training programs are developed by teachers taking into account modern educational and methodological materials using new technologies in teaching;
• A convenient form of electronic library for the course educational material has been developed for you;
• the cost of training to become a driver of a self-propelled drilling and crane machine is significantly lower than that of other training centers;
• Training takes place at a time convenient for you and in the form required for your organization.

What does failure to complete advanced training within more than 5 years entail?

Tariff and qualification characteristics of the profession “Copper operator” are required to determine the types of work tariff rate and assignment of categories according to the Russian Federation.

Based on the specified characteristics of the work performed and the requirements for professional knowledge and skills, a job description for a pile driver driver is drawn up, as well as personnel documents, including for interviews and testing when hiring.

When drawing up work (job) instructions, it is necessary to take into account general provisions and recommendations for graduation, if there is not enough information, refer to the profession search through alphabetical order.

Driver driver

Characteristics of work. Control of machines and mechanisms used in construction, installation and repair work, including those used for driving and driving piles when constructing pile foundations, sheet piles, quay fencing, retaining walls and other similar structures. Maintenance of machines, checking the serviceability of systems and components. Identifying and eliminating malfunctions in machine operation. Participation in scheduled preventive maintenance. Refilling with fuels and lubricants.

Must know: design of machines (mechanisms), rules and instructions for their operation, maintenance and preventive repairs; rules traffic when working with motorized vehicles; methods of performing work using appropriate machines; technical requirements for the quality of work performed, materials and elements of structures; consumption standards for fuels and lubricants and electricity; plumbing to the extent provided for a construction mechanic, but one category lower than that of a machinist.

1. 5th category- copra (simple land copra)
2. 6th category- pile drivers (universal, crane pile drivers, floating non-self-propelled pile drivers)
3. 7th category- copra (self-propelled units)

This job description has been automatically translated. Please note that automatic translation is not 100% accurate, so there may be minor translation errors in the text.

Preface to the job description

0.1. The document comes into force from the moment of approval.

0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. The document has been approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. Periodic verification of this document is carried out at intervals not exceeding 3 years.

1. General provisions

1.1. The position “Operator of a self-propelled drilling and crane machine of the 5th category” belongs to the “Workers” category.

1.2. Qualification requirements: complete or basic general secondary education. Advanced training. At least 1 year of experience as a mechanic repairing construction or other similar complexity machines of category 4.

1.3. Knows and applies in practice:
- device, operating principle, technical specifications cars;
- rules for drilling holes for supports and pillars;
- rules for installing supports, pillars, etc. in them. using a crane or machine;
- rules and instructions for operation, maintenance and repair of the machine, performing lifting operations during the installation of supports, poles, etc.;
- causes of occurrence, methods of manifestation and elimination of malfunctions;
- lubrication modes;
- fuel and lubricant consumption standards and ways to save them;
- plumbing for the repair of construction or other similar complex machines.

1.4. The driver of a self-propelled drilling and crane machine of the 5th category is appointed to the position and dismissed from the position by order of the organization (enterprise/institution).

1.5. The operator of a self-propelled drilling and crane machine of the 5th category reports directly to _ _ _ _ _ _ _ _ _ _ .

1.6. The operator of a self-propelled drilling and crane machine of the 5th category supervises the work of _ _ _ _ _ _ _ _ _ _ .

1.7. During his absence, the operator of a self-propelled drilling and crane machine of the 5th category is replaced by a person appointed in accordance with the established procedure, who acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.

2. Characteristics of work, tasks and job responsibilities

2.1. Manages a self-propelled drilling and crane machine during the installation of supports for overhead power lines, communications, contact networks, other supports, fence posts and lighting.

2.2. Performs shift maintenance on the machine he supervises; takes part in its planned preventive maintenance.

2.3. Knows, understands and applies current regulations relating to his activities.

2.4. Knows and complies with the requirements of regulations on labor protection and environment, complies with the standards, methods and techniques of safe work performance.

3. Rights

3.1. The operator of a self-propelled drilling and crane machine of the 5th category has the right to take actions to prevent and eliminate cases of any violations or inconsistencies.

3.2. The operator of a self-propelled drilling and crane machine of the 5th category has the right to receive all social guarantees provided for by law.

3.3. The operator of a self-propelled drilling and crane machine of the 5th category has the right to demand assistance in the performance of his duties. job responsibilities and exercise of rights.

3.4. The operator of a self-propelled drilling and crane machine of the 5th category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision of the necessary equipment and inventory.

3.5. The operator of a self-propelled drilling and crane machine of the 5th category has the right to get acquainted with draft documents relating to his activities.

3.6. The operator of a self-propelled drilling and crane machine of the 5th category has the right to request and receive documents, materials and information necessary to fulfill his job duties and management orders.

3.7. The operator of a self-propelled drilling and crane machine of the 5th category has the right to improve his professional qualifications.

3.8. The operator of a self-propelled drilling and crane machine of the 5th category has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.

3.9. The operator of a self-propelled drilling and crane machine of the 5th category has the right to familiarize himself with the documents defining the rights and responsibilities of the position held, and the criteria for assessing the quality of performance of job duties.

4. Responsibility

4.1. The driver of a self-propelled drilling and crane machine of the 5th category is responsible for failure to fulfill or untimely fulfillment of the requirements of this job description obligations and (or) non-use of granted rights.

4.2. The operator of a self-propelled drilling and crane machine of the 5th category is responsible for failure to comply with internal labor regulations, labor protection, safety precautions, industrial sanitation and fire protection.

4.3. The driver of a self-propelled drilling and crane machine of the 5th category is responsible for disclosing information about an organization (enterprise/institution) that is a trade secret.

4.4. The driver of a self-propelled drilling and crane machine of the 5th category is responsible for failure to comply or improper fulfillment of the requirements of internal regulatory documents of the organization (enterprise/institution) and legal orders of management.

4.5. The operator of a self-propelled drilling and crane machine of the 5th category is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. The operator of a self-propelled drilling and crane machine of the 5th category is responsible for causing material damage to the organization (enterprise/institution) within the limits established by the current administrative, criminal and civil legislation.

4.7. The operator of a self-propelled drilling and crane machine of the 5th category is responsible for the unlawful use of the granted official powers, as well as their use for personal purposes.

Operator of machines for drilling wells, driving and driving piles

Characteristics of work. Machine control various types, specified in §§ 128 - 130, used for driving and driving piles when constructing pile foundations, sheet piling barriers, quay barriers, retaining walls and other similar structures. Maintenance of machines, checking the serviceability of systems and components. Identifying and eliminating malfunctions in machine operation. Participation in scheduled preventive maintenance. Refilling with fuels and lubricants.

Must know: design of serviced machines, rules and instructions for their operation; methods of performing work and technical requirements for the quality of work performed; consumption standards for fuels and lubricants; types and properties of oils and fuels, their technological characteristics, rules for safe storage.

§ 128. Driver 5th category

Drilling and crane self-propelled machines with a drilling depth of up to 6 m.

Vibratory pile drivers are self-propelled with an engine power of up to 73 kW (100 hp).

Vibratorless pile drivers.

Diesel hammers are spearless.

Copras (simple land ones).

§ 129. Driver 6th category

Drilling and crane self-propelled machines with a drilling depth of over 6 m.

Self-propelled vibratory pile drivers with an engine power of over 73 kW (100 hp).

Hammers (universal, crane piledrivers, floating non-self-propelled piledrivers).

§ 130. Driver 7th category

Drilling and crane self-propelled machines with an engine power of 100 - 180 hp. with drilling diameters over 400 to 1200 mm.

Copras (self-propelled units).

Secondary vocational education required.